NEW Proxmark3 512M RFID Card Reader IC/ID Key Writer NFC 5.0 Smart Chip Copier Programmer Kit UID S50 Decoding Duplicator
$90 – $95
NEW Proxmark3 512M RFID Card Reader IC/ID Key Writer NFC 5.0 Smart Chip Copier Programmer Kit UID S50 Decoding Duplicator
Dear, I'm so glad you could visit our store.
The company was founded in Shenzhen, Guangdong, China, has an independent research and development team, can solve any RFID card and reader related solutions for you. If you have any questions, please feel free to contact us.
We ensure that all products are high quality products, can pass most international standards, at the same time, card readers have CE standards.
Support custom printing of 125Khz/13.56Mhz mobile phone stickers, standard cards, key strings and card readers.
Whether you buy or not, our team is happy to provide you with technical support and problem solving on RFID card and card reader solutions!
I wish you a happy life and best wishes.
https://drive.google.com/drive/folders/1-T2DmIDMqskCjHthroWn3rS5L6ug7y9e?usp=drive_link
-------------
1. 2 Usb Ports: One Is Used For Mobile Power, The Other Can Be Monitored Offline
2. From At91sam7s256 To At91sam7s512
Compared With The Improvements Of Pm3 Rd V2.0:
1. Built-In High-Frequency Antenna, Corresponding To The Antenna Depth, Eliminates Blind Spots, And Reads The Entire Data Card Without Interruption.
2. Increase The Frequency Of Keystrokes, The Size Of The Card Can Hold Everything.
3. The Data Analysis Is Completely Stable And The Error Rate Is Low.
4. The Low-Frequency Antenna Improves The Signal-To-Noise Ratio, The Recognition Speed Is Higher, And The Mobile Design Meets Various Needs.
5. No Antenna Interface, No Need To Connect, Easy To Damage.
6. It Is Simple And Convenient To Cancel The Lithium Battery. (In Offline Mode, You Can Use The Power Bank)
7. Except That It Has Nothing To Do With The Original Relay, It Has Low Cost, Light Weight And Convenient Transportation.
Compatible With All Official Firmware, You Can Clean Up Any Version As Needed.
You Can Use The Official "Command Line" Or "Proxmark Tool.Exe" To Work According To Your Preferences
(The Low-Frequency Antenna Is Installed On The Right Side)
Antenna #Lf: 30.41 V @ 125.00 Khz
Antenna #Lf: 22.01 V @ 134.00 Khz
# Antenna High Frequency: 28.43 V @ 13.56 Mhz
(The Low-Frequency Antenna Is Installed On The Left Side)
Working Voltage: 3.5-5.5v
Working Current: 50-130ma
Length And Width: 54mm*86.6mm
Thickness: 6.2mm (The Thinnest) 9.8mm (With Screws) 15.8 (With Low Frequency Antenna)
Filler:
1. Proxmark3 (Ant Hf With Board) -------- 1.
2. Replaceable Uid Card----1
3. Interchangeable Key Chain Uid -------- 1 Piece.
4.-------- 1 T5577 Card
Card Operation Method:
1. Ordinary Card Reader M1 S50 And Other Type B Cards 14443a.
2. Use Department-Specific Security Analysis Prng 0.
3. Use Built-In Security (Mfoc) To Parse The Entire Map.
Simulation Card Mode:
1. Mifare S50/Ultra-Light/Transparent Card Series That Simulates User Identification.
2. M1 S50 Simulation Data Of The Entire Sector. (Select A Card Reader)
3. Simulate The M1 S50 Protection Board To Obtain The Data Used To Calculate The Key (Select A Card Reader)
Silent Mode:
1. The Silent Data Transmission Analyzer Analysis Key Between The M1 S50 Card And The Card Reader.
2. Type B 14443a Silent Card Reader With Complete Communication Functions.
The Reader Is Used To Debug And Analyze Stocks.
Low Frequency:
Card Operation Method:
1. Read Low-Frequency Cards Such As Id, Hid, T55xx, Indala, Etc.
2. Use The T5577 Id / Hid / Indala Record Card To Convert It Into Three Cards.
Simulation Card Mode:
1. Enter Id/Hidden Card, Similar To The Specified Card Type.
2. Analog Modulation Scheme, Indicating Data Card And Ask/Fsk/Psk
Silent Mode:
1. Silently Sniff The Data Between The Card And The Reader (Less, Untested)
It Supports The Copying Of Most Cards, But Not All Of Them, And It Does Not Support Live And Special Card Reading And Writing.
About customs clearance: We will assist with customs clearance for the parcel. Normally, you just need to wait for the parcel to arrive. If there is a special case, we will help you solve. (Please cooperate with the customs of the destination country to deal with the goods to avoid mistakes)
Delivery of goods will choose the fastest and appropriate logistics! We will send it as soon as possible, just wait for the package to arrive! If you have requirements on the delivery time, you can choose the express transportation for extra money. If you do not choose the express transportation, we will choose the default way. The usual transportation time is 20-60 days, depending on the actual logistics. It is not supported to initiate disputes or reject goods for logistics reasons, otherwise the cost of delivery and return shall be borne by the buyer.
About product quality and returns:
If there are any technical problems with the product, we will help solve them. If the product does not achieve the desired effect of customers, we support customers to return the product for a refund.
The replicator/card reader/card matches 98% of systems, but if it is a special system or a special protected card, the card cannot be copied. (including but not limited to live card, advanced encryption card, credit card, etc.)
Product warranty for one year, if there is any problem, please contact us, we will solve for you!
If consumers do not like the product or do not meet expectations, please contact us within 5 working days, we support the return of refund, return freight needs to be borne by the buyer.
Please read the above terms carefully and purchase is deemed to be a tacit agreement to the above terms.
window.adminAccountId=2674538052;
Additional information
Color | Proxmark3-suit2, Proxmark3-suit3, Proxmark3-suit4, Proxmark3-suit5, Proxmark3-suit1 |
---|---|
Type | ic |
Interface | USB |
Model Number | Proxmark3 |
Brand Name | Anruhoo |
Origin | Mainland China |
Certification | none |
70 reviews for NEW Proxmark3 512M RFID Card Reader IC/ID Key Writer NFC 5.0 Smart Chip Copier Programmer Kit UID S50 Decoding Duplicator
Only logged in customers who have purchased this product may leave a review.
Protect What Matters
Most, Family Cyber Kit
Now on Sale!
at an exclusive price.
Ellie Julius –
Bad antenna quality, cant read any card properly even after fully exposing the hf antenna. Lf antenna never worked… I return immediately.
Craig Piro –
Samirah Hood –
Cassey Odle –
Daanyal Shepard –
Dieter Krist –
Gianmaria De Sario –
Exactly as expected, arrived quickly and does what I want it to. Very happy
Speranzio Bartolone –
The Proxmark is working correctly
Kholmatzhon Daniarov –
All Oki
Aliya Fernandez –
Very good product, recommend
Durante Sciara –
Great product. It works perfect and as described, and comes with a micro USB cable to connect to computer. I set up ProxSpace on my windows PC, and it worked perfectly.
Lluciano Marcos –
It a RDV3 with 512KB of memory flash. Dont use the usb cable that come with it. Search YT for n1Xt-1ZmjM0 for video by Gator96100 follow it to flash it with ICEMan firmware. Once on ICEMan Firmware I use it to clone 2 HID 125khz tag ( pm3 –> lf hid reader *then* pm3 –> lf hid clone -r *then* pm3 –> lf hid reader *again to cloned data* ). Took 8 day to get to US.
Jaqueline Phipps –
Standing old bootloader. Set up to remain (push and trim the button).
Pratsyu chudos. Vidskanuv and doslaidv ussydov.
Political for reverse of inzhiniring TA doslidzhennya Mifare Classic
Kawano Tanyu –
Arrived very well packed and with all the cards. I have already tested and working perfectly.
Miriam Perry –
fast shipping. recommended seller . I will try it now this toy .
Isadora Heer –
good item and rapid delivery. but it is difficult to setup for beginners.
Antonio Levine –
Fast delivery, it works nicely but the user must read some tutorials online before flashing the last firmware (iceman)
Liberatore Accordino –
Arrived in little less than 2 weeks in Hungary, works perfectly with iceman software, already copied some Kantech IoProx cards with the low frequency antenna. The high frequency antenna also works, I already read some cards with it. They also included 4 cards and a tag with all the different mainstream RFID protocolls, which came by a surprise, but I’m very pleased with it. 10/10 overall.
Eleri Barnes –
Arrived in perfect condition, it took 15 days to the northeastern region of the country. Everything working. Came even with more cards that I imagined.
Emmanuel Gillie –
Works the same as the original plate and at less than half the price. I was about to return it because I didn’t know how to flash it for android but in the end I got it with a previous version of the software.
Gage Edmonds –
Awesome product and came super fast
Shante Dezern –
It arrived perfect and 1 day ahead of schedule great
Emma Carra –
Worked properly top line
Dastan Nurbolatev –
Boa
Alfredo Lamanna –
Arrived on the right date without delay
Iside Casaletto –
Works very well 😉 Thanks
Oscar Álvarez –
It works well. I have to study instead, but it’s funny.
Della Drew –
Everything ok.
Debbie Tanner –
great
Fritz Filippi –
bom
Branda Goshorn –
It was quickly delivered with fast shipping. We have not used the goods yet, but as far as we can see there is no damage on delivery, it is the best.
Sigmund Bruckmann –
Excellent service. Exactly what is was looking for and price was great. Item arrived within 7 days which was incredible. Included sample prox cards and fob. Worked perfect and just what I needed. Brilliant thank you.
Anacleto Adornetto –
I arrive in Spain in 6 days. The seller sent me extra cards and key chains, correct packaging, all working and in perfect condition. I recommend it 100%
Fernand Aveline –
Hardware was soft bricked but got it working! Lovey device.
Takako Ream –
Good product and arrived in excellent condition and is now being tested and used
Lorean Soni –
Fast shipping, works great, came with RFID cards and tags as well as a USB cable. Successfully flashed RRG/Iceman firmware, has both 512KB internal flash and at least 256KB of external flash so works with RDV4 standalone modes.
Olevia Lauder –
arrived in very great condition, all items as described.
Reiko Jeanlouis –
Insufficient packaging, the box is damaged.
Micael Montes –
Works ok with Iceman. Must be flashed the first time. The description is a bit deceiving. It’s the 512K variant, not 512M
Fukumoto Shusake –
Everything ok. The item works perfectly
Devon Huntoon –
Works good, installed iceman from yt tutorial, tested on couple tags, went ok. Fast shipping, under 2 weeks to RO. Thanks for the gifts.
Néo Lortie –
Good quality, Quickly delivered, including several cards and a badge see photos
Kathi Okamura –
With a clear conscience I recommend the product and the seller. Product delivered before the declared time. The product worth attention and the price is good. I will definitely return to this seller.
Maximilien Chopin –
Nice product! Works well!!! (test in macbook pro M1)
Rosalie Robertson –
A++ received package in 8 days. Able to flash to latest Iceman firmware. Had one issue when I was flashing the boot loader firmware “./pm3-flash-bootrom” After flashing it stopped detecting the device “COM3” the fix was to unplug the usb push and hold side button on pm3 plug in the device and when you see it re populate in device manager run the “./pm3-flash-full image” command than it should be able to hold the connection! – will update later after testing card that i cloned.
Susann Masson –
works perfectly. please take note that the positioning for hf tags is extremely sensitive. make sure to use the following command to determine the best position for the tag before detecting/copying it.
hf 14a reader -@
Xose Mendez –
Excellent quality, works perfectly!
Savannah Brotherton –
Works perfectly. 512M chip and works with ICEMAN
Marlen Akhmetov –
Great product
Maariya Kramer –
awesome product very useful!!!
Zoraida Swick –
as in description.
Mahi Reid –
All right, I recommend!
Carla Poole –
Works good. You need some computer engineer skills to make it working.
Verline Cordon –
Everything perfect, I fulfilled its function without any problem
Winston Hyde –
Device works very well. The kit I ordered came with 3 T5577 tags and 5 Mifare Classic 1K (Magic Gen1a) cards. Also came with more cards which I think is in the box for all kits: a UID card (Mifare Classic 1K Magic Gen1a), a CUID card (Mifare Classic 1K Magic Gen2), a normal (non-magic) IC-M1 Mifare Classic 1K card, and an ID-5577 T5577 card.
Was able to install Iceman firmware perfectly fine following tutorial on github, and antennas work fine. Can read and write both HF and LF tags, the ones that came in the box and also Hitag2 cards I already had.
Overall very good value for money.
Ira Forster –
Top very good have go Brazil Mt successful min Great gratitude o tenks for very welcome coming my dear friend
Korey Wu –
Thanks! Very fast! Everything is perfect! Easy communication. You made me happy. Proud! I strongly recommend!!!
Valtena Amodei –
Everything works Super, rolled the last Iceman firmware.
Prudence Rodden –
The promark3 easy works very well was easy to install the Icemen firmware thank you
Diedra Spath –
Put 4 different cards and a keychain in the kit. Big respect
Kemberly Roza –
Great product. It works perfect and as described, and comes with a micro USB cable to connect to computer. I set up ProxSpace on my windows PC, and it worked perfectly.
Marchelle Dowden –
It a RDV3 with 512KB of memory flash. Dont use the usb cable that come with it. Search YT for n1Xt-1ZmjM0 for video by Gator96100 follow it to flash it with ICEMan firmware. Once on ICEMan Firmware I use it to clone 2 HID 125khz tag ( pm3 –> lf hid reader *then* pm3 –> lf hid clone -r *then* pm3 –> lf hid reader *again to cloned data* ). Took 8 day to get to US.
Roderick Roth –
Nice product! Works well!!! (test in macbook pro M1)
Thibault Silvestre –
A++ received package in 8 days. Able to flash to latest Iceman firmware. Had one issue when I was flashing the boot loader firmware “./pm3-flash-bootrom” After flashing it stopped detecting the device “COM3” the fix was to unplug the usb push and hold side button on pm3 plug in the device and when you see it re populate in device manager run the “./pm3-flash-full image” command than it should be able to hold the connection! – will update later after testing card that i cloned.
Lakisha Mullenix –
works perfectly. please take note that the positioning for hf tags is extremely sensitive. make sure to use the following command to determine the best position for the tag before detecting/copying it.
hf 14a reader -@
Enrique Lutz –
Excellent quality, works perfectly!
Aasiyah Haney –
Great product
Coleen Dragon –
Works perfectly. 512M chip and works with ICEMAN
Lelah Pelosi –
awesome product very useful!!!
Alfonso Villapol –
Bad antenna quality, cant read any card properly even after fully exposing the hf antenna. Lf antenna never worked… I return immediately.